Understanding the Roof Coating Process
Whether you’re protecting your investment or extending your current roof’s lifespan, knowing the roof coating application process is essential for any commercial property owner. From the experts here at Noble Roofing, this guide walks you through each step of the process—from preparation to the final inspection—so you can make the most informed decision for your building.
A professional coating can stave off expensive roof repairs or delays in potential roof replacement, saving you both stress and money.
Step 1: Initial Roof Inspection & Assessment
Before application begins, an in-depth roof inspection is essential. A certified commercial roofing contractor will examine the roof’s existing condition, looking for signs of:
– Ponding water
– Blistering
– Cracks or splits
– Surface contamination
If damage is found, it may need to be addressed with timely roof repair solutions before the coating process can proceed.
According to the National Roofing Contractors Association (NRCA), regular inspections are critical to maintaining the effectiveness and longevity of commercial roofing systems.
Step 2: Surface Preparation & Cleaning
Preparation is key to a successful roof coating project. The roofing company will:
– Remove debris and surface pollutants
– Pressure-wash the roof surface
– Prime the surface, if necessary, to improve adhesion
Skipping this step or doing it poorly can severely limit the effectiveness of the coating material. Noble Roofing specialists use industry-best equipment and standards to ensure powerful adhesion and longevity.
Step 3: Minor Repairs and Sealing
Any existing penetrations, flashing issues, or cracks must be repaired before the coating goes on. Our experienced commercial roofing contractors expertly seal seams, fasteners, and potential leak sources, including:
– Skylights
– HVAC units
– Roof drains
We also conduct a thorough review to ensure everything is watertight before moving forward.
Step 4: Coating Application
Once prepped, the appropriate coating system is applied. This can vary based on the original roofing material and climate needs but often includes options like acrylic, silicone, or polyurethane. Applications may be done via:
– Spray
– Roller
– Brush
Noble Roofing follows manufacturer specifications and applies coatings evenly for optimal coverage and protection.
Step 5: Curing & Final Inspection
After coating, curing can take anywhere from 8 to 24 hours depending on product and weather conditions. We conclude the project with a final inspection and walkthrough, so you know exactly what was done and what to watch for.